Table of Contents
Advertisement
11.1 Liability
The manufacturer will only assume liability if the product is used in accordance with the descriptions and instruc
tions provided in this document. The manufacturer will not assume liability for damage caused by disregarding the
information in this document, particularly due to improper use or unauthorised modification of the product.
11.2 Warranty
Further information on the warranty terms and conditions can be obtained from the qualified personnel that has fit
ted this product or the manufacturer's service (see inside back cover for addresses).
11.3 Privacy notice
Some components of the product contain data storage modules that temporarily or permanently store data. These
data are exclusively of a technical nature and serve the safety of the user, the identification and elimination of errors
and/or optimising the functionality of the product.
Depending on the model and version, malfunctions and faults of components relevant for safety as well as status
messages of individual components are recorded. The data are available in anonymised/pseudonymised form
when the data storage modules are read in case of service. Ottobock stores, processes and uses the data accord
ing to the applicable data protection regulations.
For detailed questions please contact: datenschutz@ottobock.de. For questions regarding treatment, please con
tact the qualified personnel.
11.4 Service life
Expected lifetime: 5 years
The design, manufacturing and requirements for the intended use of the product are based on the expected life
time. These also include the requirements for maintenance, ensuring effectiveness and the safety of the product.
12 Technical data
INFORMATION
► Much of the technical data below is given in mm. Please note that product settings – unless otherwise spe
cified – cannot be adjusted in the mm range but only in increments of approx. 0.5 cm or 1 cm.
► Note that the values achieved during adjustment may deviate from the values specified below. The deviation
can be ±10 mm and ±2°.
General information
Application class (in compliance with DIN
EN 12184)
Dimensions and weights
Seat depth
Seat width
Seat width with removable lateral pads
Seat height
Lower leg length
Dimensions and weights
Angle of the seat surface
Angle of leg to seat
Distance from arm support to seat
Front position of the arm supports
Forearm support height
Forearm support length
Back support height*
Overall width
Overall height
Overall length
Weight when empty*
Skippi Plus
Class B
290 – 370 mm (11.4" – 14.5")
300 – 420 mm (11.8" – 16.5")
240 – 360 mm (9.4" – 14.2")
445 mm (17.5")
150 – 430 mm (5.9" – 16.9")
0°–6°
90°–170°
225–325 mm (8.9"–12.8")
300–580 mm (11.8"–22.8")
160–230 mm (6.3"–9")
235 mm (9.3")
400/420/440/460 mm (15.7/16.5/17.3/18.1")
590 mm (23.2")
775 mm/840 mm (30.5"/33.1")
With leg supports: 870 mm/940 mm (34.2"/37")
Without leg supports: 640 mm/710 mm (25.2"/28")
66.5 kg (146.5 lbs)
Technical data
71
Advertisement
Table of Contents
