Maintenance Intervals - Otto Bock Skippi Plus Instructions For Use Manual

Maintenance and repair
• The product may not be used if defects are noted. This applies in particular in case of instability of the product
or altered driving characteristics as well as problems with the user's seating position or the stability of the seat.
Inform the qualified personnel promptly for the rectification of defects.
• This also applies if loose, worn, bent or damaged components, cracks in the frame or broken frame compon­
ents are identified.
• Some maintenance tasks can be carried out to a specified extent by the user at home. Further information is
found in the section "Maintenance intervals" (see Page 64).
• Failure to maintain the product can lead to injuries for the user of the product.

9.1.1 Maintenance intervals

The functions described below must be checked by the user or an attendant at the specified intervals:
Component Activity
Drive wheels Check whether wheel mounts are securely fastened
Check whether the central nut on the drive shaft is
securely fastened
Check whether wheels rotate freely and without axial
runout
Check directional stability of the power wheelchair
Caster wheels Check the steering play of the caster wheels
Check whether the fork fits in the adapter without play
Check whether wheels rotate freely and without axial
runout
Check whether the mounting nuts are tight
Seat attachment Check whether mounting screws are fastened properly
Legrest Check ratchet mechanism for functionality and firm fit
Check for damage to footplates
Legrest, mechan­ Check ratchet mechanism for functionality and firm fit
ically elevating
Check for damage to footplates
Visually inspect the piston rod for scratches and oil
leaks
Padding/straps Ensure padding is in perfect condition
Check the attachment straps for wear
Check belt buckle for functionality
Tyres Check air pressure (see tyre sidewall)
Check for sufficient tread depth (min. 1 mm)
Check for damage
Batteries Check battery charge level
Lights Check for external damage
Verify functionality
Electronics Check whether the control unit is functioning properly
(inform qualified personnel of any LED error messages)
Check whether the battery charger is functioning prop­
erly (inform qualified personnel of any LED error mes­
sages)
Check plug connections
Brake When brake is disengaged: check whether the LED
indicator on the control panel is flashing
When brake is engaged: check braking function by try­
ing to push the chair
Power seat adjust­ Visually inspect all moving components and cabling for
ments damage
Check that screw connections are tight
Check whether mounting screws are fastened properly
64
Prior to Weekly
every use
X
X
X
X
X
X
X
X
Monthly
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Skippi Plus