Updating Firmware - Thermo Scientific Mercury Freedom 80i Manual

System Installation, Set Up and Shut Down

Updating Firmware

3. At the 80i, 81i, and 82i front panels, turn the power switches OFF.
4. At the 82i rear panel, disconnect the 120 VAC plug from the UPS
connector, and disconnect the 208/220 VAC from the rear connectors.
5. Turn the sample pump OFF.
6. Inside the 82i, turn the two hot line power breakers OFF.
Updating Firmware
The firmware can be updated by the user in the field via the serial port or
over the Ethernet. This includes both the main processor firmware and the
firmware in all low-level processors. Refer to the iPort manual for the
firmware update procedure.
Thermo Fisher Scientific Mercury System Manual 2-11