Thermo Scientific Mercury Freedom 80i Manual page 3

Thermo Fisher Scientific
About This Manual
This manual provides information about installing, maintaining, and
servicing the Mercury System. It also contains important alerts to ensure
safe operation and prevent equipment damage. The manual is organized
into the following chapters and appendices to provide direct access to
specific operation and service information.
Chapter 1 "Introduction" provides an overview of Mercury System
●
instruments and describes associated Mercury System components.
Chapter 2 "System Installation, Set Up and Shut Down" describes how
●
to setup, start up, and shut down the instrument. It also provides the
recommended initial parameter settings.
Chapter 3 "Calibration" provides the manual system calibration
●
procedure, the auto system calibration procedure, and the calibration
check procedure.
Chapter 4 "Troubleshooting" presents guidelines for diagnosing
●
instrument failures, isolating faults, and includes recommended actions
for restoring proper operation.
Chapter 5 "Preventive Maintenance" describes the periodic
●
maintenance procedures that should be performed on the system
instruments and components to ensure proper operation.
Chapter 6 "Optional Equipment" describes the optional equipment
●
that can be used with the Mercury System.
Appendix A "Warranty" is a copy of the warranty statement.
●
Appendix B "System Reference Drawings" provides the plumbing and
●
electrical drawings for the Mercury System instruments and associated
components.
Appendix C "Flowcharts of Menu-Driven Firmware" presents detailed
●
flowcharts for the 80i and the 81i menu-driven firmware. They are
provided here for convenience in navigating the Mercury System
menus and screens.
Mercury System Manual i