YASKAWA SI-EN3/V Technical Manual page 16

5 Installation Procedure
Note: Cover removal steps for certain larger models of V1000 with a Terminal Cover:
-Single-Phase 200 V Class: CIMR-VUBA0006 to BA0018
-Three-Phase 200 V Class: CIMR-VU2A0008 to 2A0069
-Three-Phase 400 V Class: All models
Remove the terminal cover before removing the bottom cover to install the EtherNet/IP Option. Replace the terminal cover after
wiring the EtherNet/IP Option.
Figure 7
4. Reattach the bottom cover.
5. Connect the EtherNet/IP Option to the drive. Properly secure the tabs on the left and right sides of the EtherNet/IP
Option to the drive case.
Figure 8
16
Figure 8 Models with Terminal Cover
Tabs should line up
Tabs should line up
Figure 9 Attach EtherNet/IP Option
YASKAWA ELECTRIC SIEP YEACOM 01A V1000 Option EtherNet/IP Technical Manual