On Mode - Raycus ABP Series User Manual

The communication sends "EEC", or the host computer software clicks the
③
The communication sends "ELE", or the host computer software clicks the
④
⑤
XP1-A1 is high level, XP1-A6 is low level or floating;
⑥
XP1-A1 is high level, XP1-A3 is high level;
⑦
XP1-A1 is high level, XP1-A8~A14 are low level or floating;
⑧
XP1-A1 is high level, XP1-A6 is high level
⑨
XP1-A1 is high level, XP1-A3 is low level or floating
⑩
XP1-A1 is high level, not all XP1-A8~A14 are low level;
⑪
Communication
The communication
The communication sends "ABN" or the host computer software clicks the
⑫
output guide laser；
Communication send "ABF" or the host computer software click the
off the guide laser；
Communication sends "SDC XX" to set the power percentage, XX represents the power percentage,
⑬
or the host computer software clicks the

5.1 ON Mode

In"ON" mode, users can set different operating modes by using the Raycus Laser Control System
(RLCS) or using a direct communication command method, which can be memorized by the laser source
even after powering off.
"EMON"
send
"ON" button to emitting the laser;
sends "EMOFF"
"OFF" button to turn off the laser;
Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C3000XZ~RFL-C12000XZ
or the host
or the host
33
computer software
computer software
button；
button；
button；
click the
clicks the
button to
button to turn