Table of Contents
Advertisement
3.3
Operation Flowchart
Figure 3.1 shows the diagnostic program operation flowchart.
E8000 emulator only
(E8000 ONLY or E8000 + EVCHIP)
Specify test
conditions
Initiate diagnostic
program
TEST01
to
TEST25
END
Figure 3.1
Note: TEST06 is executed when the optional LAN board test is specified.
TEST07 is executed when the P1284 interface test is specified.
TEST08 is executed when the serial interface test is specified.
TEST12 is executed when the operation tests are specified.
TEST16 to TEST25 are not executed when the E8000 ONLY test is selected.
START
Load diagnostic
program
Test system
configuration
Diagnostic Program Operation Flowchart
8
E8000 + EVCHIP + FIXED USER
The user cannot perform this test.
Advertisement
Table of Contents
