11.10
Installing the lower triple clamp
Main work
–
Take off cable holder
–
Remove screw
–
Remove screw
–
Remove the upper triple clamp with the handlebar and hang
them to the side.
Info
Cover the components to protect them against damage.
V01696-10
Do not kink the cables and lines.
–
Remove O-ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
V01695-10
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing.
–
Check whether upper steering head seal
tioned.
–
Slide on protective ring
102146-10
–
Position the upper triple clamp with the handlebar.
–
Mount screw
V01697-10
SERVICE WORK ON THE CHASSIS 11
1
in front of the left radiator.
2
.
3
.
4
. Remove protective ring
p. 140)
1
2
3
and O-ring
4
, but do not tighten yet.
5
.
is correctly posi-
.
51