Displaying The Software Version; Selecting Reclocking Rate; Selecting Gpo Triggers - evertz 7700 Multiframe Manual

4.2.3. Displaying the Software Version

Software operating on the 7707OE-3G-1 has a version number associated with it. This version number
can be indicated to the display. By this means, it can be verified that the module is operating with the most
recent software. To indicate the software version to the display, select the STAT (Status) menu item in
menu level 1, followed by the VER (Software Version) menu item.
STAT
VER
SOFTWARE
VERSION
The user can select the BACK menu item to return to menu level 1.

4.2.4. Selecting Reclocking Rate

User configuration selects the reclocking rate. If the AUTO mode is selected, detected input rate will be
reclocked. Otherwise, the reclocking rate will be as selected. To configure the reclocking rate by the
7707OE-3G-1, select the CTRL (Control) menu item in menu level 1, followed by the RATE (Video Rate)
menu items.
CTRL
RATE
AUTO
2970
1485
270
BYP

4.2.5. Selecting GPO Triggers

The 7707OE-3G-1 provides a user-enabled GPO. The GPO has logical function for loss of fiber input
signal. To configure the GPO enable mode, select the CTRL (Control) menu item in menu level 1 followed
by the GPO (GPO) and LOS (Loss of Fiber Input) menu items.
CTRL
GPO
LOS
EN
DIS
7707OE-3G-1 3G/HD/SDI Re-Clocking Optical to Electrical Converter
VER x.x BUILD xxx
The following list describes possible user selections for this menu item:
Sets the reclocking rate to auto detect.
AUTO
Sets the reclocking rate to 2970Mb/s.
2970
Sets the reclocking rate to 1485Mb/s.
1485
Sets the reclocking rate to 270Mb/s.
270
Sets the reclocking rate to bypass mode.
BYP
The following list describes possible user selections for this menu item:
Enables GPO.
EN
Disables GPO.
DIS
Revision 1.0
7700 MultiFrame Manual
Software version. Character string scrolls
across four digit display.
Page-11