Overview - evertz 7700 Multiframe Manual

1.

OVERVIEW

The 7707OE-3G-1 is a VistaLINK
SMPTE 292M (1.485Gb/s), SMPTE 259M-C (270Mb/s), SMPTE 305M (SDTi), and DVB-ASI (270Mb/s).
Automatic reclocking, data rate selection and data rate indication is provided for rates from 270Mb/s to
2.970Gb/s. Monitoring and control of card status and parameters is provided locally at the card edge, and
remotely via VistaLINK
outputs. Also, the 7707OE-3G-1 provides one user selectable GPO.
The 7707OE-3G-1 occupies one card slot and can be housed in either a 1RU frame, which will hold up to
three modules, or a 3 RU frame, which will hold up to 15 modules.
Features:
•
Supports all SMPTE 424M standards at 2.970Gb/s
•
Supports all SMPTE 292M standards at 1.485Gb/s
•
Supports all SMPTE 259M-C standards at 270Mb/s
•
Supports DVB-ASI (270Mb/s), and SMPTE 305M (SDTi) rates
•
Auto rate selection and indication for all SDI, HD-SDI, 3G-SDI data rates from 270Mb/s to
2.970Gb/s
•
User enabled GPO configurable to normally open or normally closed
•
Reclocked optical input, with selectable non-reclock mode – 3 outputs
•
Both outputs maintain polarity from input to output for DVB-ASI applications
•
Comprehensive signal and status monitoring via local four-digit card-edge display, or remotely via
VistaLINK
®
•
Detection and display of optical input power, and video format
•
Display of received optical power for continuous indication of link integrity
•
Wide range optical input (1270nm–1610nm)
•
Supports multi-mode and single-mode fiber
•
Fully hot-swappable from front of frame
•
VistaLINK enabled for remote monitoring and control when installed in 7700FR-C frame with
®
7700FC Frame Controller
7707OE-3G-1 3G/HD/SDI Re-Clocking Optical to Electrical Converter
enabled, optical to electrical converter for SMPTE 424M (2.970Gb/s),
®
. The 7707OE-3G-1 accepts one fiber input and provides three reclocked coaxial
®
Revision 1.0
7700 MultiFrame Manual
Page-1