7700 MultiFrame Manual
7707OE-3G-1 3G/HD/SDI Re-Clocking Optical to Electrical Converter
3.
SPECIFICATIONS
3.1.
OPTICAL INPUT
Standards:
SMPTE 297M
Reclocked:
SMPTE 424M, SMPTE 292M, SMPTE 259M C, SMPTE 305M, DVB-ASI, M2S
Non-Reclocked: Any bi-level signal type at rates of 270Mb/s – 2.970Gb/s
Connector:
Female SC/PC, ST/PC or FC/PC
Wavelength:
1270nm -1610nm
Optical Sensitivity
Standard:
High Sensitivity (-H):
Max. Input Power:
Standard:
High Sensitivity (-H):
Fiber Size:
3.2.
SERIAL VIDEO OUTPUTS
Number of Outputs: 3 Per Card (all outputs DVB-ASI/M2S compliant)
Connectors:
BNC per IEC 61169-8, Annex A
Impedance:
75Ω(nominal)
Signal Level:
800mV(nominal)
DC Offset:
0V ±0.5V
Rise and Fall Time: < 135ps (HD/3G)
< 900ps (SD)
Overshoot:
< 10% of amplitude
Return Loss:
> 15dB to 1.5Ghz
> 10dB to 3GHz
Alignment Jitter:
< 0.2UI (Reclocked) to 1.485Gb/s
< 0.3UI (Reclocked) to 2.970Gb/s
3.3.
GENERAL PURPOSE OUTPUTS
Number of Signals:
Connector at Breakout:
Output Type:
Output Current (min):
3.4.
ELECTRICAL
Voltage:
+12VDC
Power:
8 Watts
Page-6
-21dBm @ 2.970Gb/s
-28dBm @ 2.970Gb/s
-1dBm
-8dBm
62 µm core / 125 µm overall
1 output
Multi-pin Removable Terminal Block
Dry contact relay closure to GPO ground, user selectable polarity (Normally
Open or Normally Closed), normally open (without power).
100mA
Revision 1.0