Table of Contents
Advertisement
14 WHEELS
14.7
14.7.1
116
Rear wheel
Removing the rear wheel
-
Grease new shaft seal rings
they are flush.
Finishing work
-
Install the front wheel.
(a
Preparatory work
-
Raise the motorcycle with a lift stand.
Main work
-
Press the brake caliper onto the brake disc by hand in order
to push back the brake piston.
Info
Make sure when pushing back the brake piston that
you do not press the brake caliper against the spokes.
O.
Remove nut
8.
-
Remove chain adjuster
enough to allow the rear wheel to be pushed forward.
-
Push the rear wheel forward as far as possible. Remove the
chain from the rear sprocket.
Info
Cover the components to protect them against dam
age.
Warning
Danger of accidents
the braking effect.
-
Always lay the wheel down in such a way that the
brake disc is not damaged.
-
Holding the rear wheel, withdraw the wheel spindle. Take the
rear wheel out of the swingarm.
•
Info
I
Do not operate the foot brake lever when the rear
wheel is removed.
8
O
and
and press in until
p. 113)
(�
p. 12)
8
Pull out wheel spindle
Damaged brake discs reduce
far
Advertisement
Table of Contents
