Table of Contents
Advertisement
6 FORK, TRIPLE CLAMP
28
-
Position the spring.
-
Mount compression shim stack
facing downward.
Info
Note the setting list.
R00031-10
-
Grind the piston on both sides on a surfacing plate using
1200 grit sandpaper.
-
Clean the piston.
-
Lubricate the piston ring.
I Fork oil (SAE 4) (48601166S1)
-
Mount the piston with chamfer
-
Mount rebound shim stack (3 with the smaller shims facing
upward.
•
Info
I
Note the setting list.
B04094-10
-
Press the piston downward against the spring.
Info
-G)
Make sure the pistons do not squeeze the shims.
-
Position valve @ in hydrostop needle
the hydrostop needle.
Guideline
Hydrostop needle on
Info
f) -
ing side.
0
-
Unclamp the piston rod.
0
with the smaller shims
(@:!I
p. 280)
f)
facing down.
@).
M6x0.5
silver hydrostop needle on compression damp
-
red hydrostop needle on rebound damping side.
Mount and tighten
8 Nm (5.9 lbf ft)
..
Advertisement
Table of Contents
