Table of Contents
Advertisement
0-
Main work
-
Degrease the piston rod.
-
Clamp the piston rod with the special tool as far up as possi-
ble.
I
Clamping stand (T14049S)
-
Release hydrostop needle
rod.
8
✓ Valve
Info
f) -
ing side.
G) - red hydrostop needle on rebound damping side.
-
Remove rebound shim stack
e
-
Remove piston
/
-
Remove compression shim stack
-
Remove the spring.
R00031-10
-
Remove adapter
-
Remove spring (D.
6 FORK, TRIPLE CLAMP
(�
p. 299)
O
and remove it from the piston
usually remains in the hydrostop needle.
silver hydrostop needle on compression damp
8.
C,.
0.
(D
with spring @.
23
Advertisement
Table of Contents
