Table of Contents
Advertisement
14 WHEELS
122
-
Check the chain sliding piece for wear.
If the lower edge of the chain pins is in line with or below
the chain sliding piece:
-
Change the chain sliding piece.
-
Check that the chain sliding piece is firmly seated.
If the chain sliding piece is loose:
-
Tighten the screw on the chain sliding piece.
Guideline
Screw, chain slid-
ing piece
-
Check the chain guide with a slide gauge for dimension (j .
Minimum thickness (j of
the chain guide
If the measured value is less than the specification:
-
Change the chain guide.
402421-10
-
Check that the chain guide is firmly seated.
If the chain guide is loose:
-
Tighten the screws on the chain guide.
Guideline
Remaining
screws, chassis
Finishing work
-
Remove the motorcycle from the lift stand.
M8
15 Nm
(11 .1 lbf ft)
6 mm (0.24 in)
M6
10 Nm (7.4 lbf ft)
(0
p. 12)
..
Advertisement
Table of Contents
