Table of Contents
Advertisement
15 WIRING HARNESS, BATTERY
Warning
-
-
-
-
-
-
130
Installing the batte�
H00388-10
Recharging the batte
Batteries contain harmful substances.
Risk of injury
Keep batteries out of the reach of children.
Keep sparks and open flames away from the batteries.
Only charge batteries in well-ventilated rooms.
Maintain a minimum clearance from inflammable materials when charging batteries.
Minimum clearance
Do not charge deeply discharged batteries if charge is already below the minimum voltage.
Minimum voltage before the start of the charge
Dispose of batteries with less than the minimum voltage correctly.
Main work
-
Insert the battery into the battery compartment with the ter
minals facing forward and secure with holding bracket
I Battery (C22S)
(a
p. 263)
-
Mount and tighten screw
Guideline
Screw, battery sup
port bracket
•
Info
e
I
Contact disks
and cable sockets
tery terminal.
0
-
Connect positive cable
Guideline
Screw, battery termi-
nal
-
Slide positive terminal cover
-
Connect negative cable @ to the battery.
Guideline
Screw, battery termi-
nal
-
Slide negative terminal cover
Finishing work
-
Mount the seat.
(0
p. 95)
-
Install the air filter box cover.
1 m (3 ft)
9 V
8.
M6
10 Nm (7.4 lbf ft)
must be mounted under screws
C,
with the claws toward the bat
to the battery.
M5
2.5 Nm (1.84 lbf ft)
(D
over the positive terminal.
M5
2.5 Nm (1.84 lbf ft)
C,
over the negative terminal.
(0
p. 90)
O.
8
..
Advertisement
Table of Contents
