Table of Contents
Advertisement
l
o
o o--�--0 o
16 17 18
2 3
-
Pull at the top part of the chain with the specified weight f).
Guideline
Weight, chain wear mea
surement
-
Measure distance (;) of 18 chain rollers in the lower chain
section.
Info
Chain wear is not always even, so you should repeat
this measurement at different chain positions.
Maximum distance (;) at
the longest chain section
l
If distance (;) is greater than the specified measurement:
-
Change the drivetrain kit.
o
400987-10
-
Check the chain sliding guard for wear.
If the lower edge of the chain pins is in line with or below
the chain sliding guard:
-
Change the chain sliding guard.
-
Check that the chain sliding guard is firmly seated.
If the chain sliding guard is loose:
-
Tighten the screws on the chain sliding guard.
Guideline
Screw, chain
sliding guard
10 ... 15 kg (22 ... 33 lb.)
272 mm (10. 71 in)
(�
p. 123)
Info
When the chain is replaced, the rear sprocket
and engine sprocket should also be changed.
New chains wear out faster on an old, worn
rear sprocket or engine sprocket.
M6
6 Nm (4.4 lbf ft)
14 WHEELS
®
Loctite
243
™
121
Advertisement
Table of Contents
