Table of Contents
Advertisement
Main work
-
Remove screw
I
0
-
Position the special tool. Mount and tighten the banjo bolt.
Guideline
I
Banjo bolt
I
Oil pressure adapter (77329006000)
-
Connect the pressure tester to the special tool without the T
plate.
I
Pressure testing tool (61029094000)
401095-01
-
Check the engine oil level.
Danger
Danger of poisoning
inhaling them may result in unconsciousness and
death.
-
Always make sure there is sufficient ventilation
when running the engine.
-
Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
-
Start the engine and let it warm up.
-
Check the engine oil pressure.
Engine oil pressure
Engine oil tempera-
ture: 80 °C (176 °F)
Engine speed:
1,600 rpm
Engine oil tempera-
ture: 80 °C (176 °F)
Engine speed:
6,000 rpm
If the measured value is less than the specification:
-
Change the oil filter. Check the oil pumps for wear.
Check that all oil holes are clear.
-
Switch off the engine.
20 LUBRICATION SYSTEM
O.
I M10x1
I 8 Nm (5.9 lbf ft)
(0
p. 293)
(0
p. 290)
(�
p. 242)
Exhaust gases are toxic and
0.35 bar (5.1 psi)
2.2 bar (32 psi)
247
Advertisement
Table of Contents
