ICP DAS USA I-87211W User Manual page 83

2.27 ~AA1
Description:
The command is used to reset the Host WatchDog timeout
status of a module.
Syntax:
~AA1[CHKSUM](CR)
~ Delimiter character
AA Address of the module in hexadecimal format (00
to FF)
1 Command to reset the Host WatchDog timeout
status
Response:
Valid Command:
Invalid Command:
! Delimiter for a valid command.
? Delimiter for an invalid command.
AA Address of the module in hexadecimal format (00
to FF)
There will be no response if the command syntax is incorrect,
there is a communication error, or there is no module with the
specified address.
Examples:
Command: ~070
!AA[CHKSUM](CR)
?AA[CHKSUM](CR)
83/93 I-87211W User Manual V2.5, Oct. 2010
I-87211W User Manual