ICP DAS USA I-87211W User Manual page 42

will reset to safe mode and the DO output
command will be ignored
There will be no response if the command syntax is incorrect,
there is a communication error, or there is no module with the
specified address.
Examples:
Command: #010001
Response: >
Sets DO0 of the module with address 01 and the
module returns a valid response.
Command :#010016
Response: ?01
Sets DO0 and DO3 to Off, DO1 and DO2 to On
DO6, DO7 and DO8 to Off and DO5 to On。
This module only includes one DO channel, so the
command is invalid.
Command: #010001
Response: !
A Host WatchDog Timeout was occurred and so the
DO output command is ignored.
Related Commands:
Section 2.6 #AA0A (Data)
Section 2.7 #AA1cDD
Section 2.8 #AAAcDD
Section 2.12 $AA6
Section 2.18 @AA
Section 2.19 @AA(Data)
42/93 I-87211W User Manual V2.5, Oct. 2010
I-87211W User Manual