ICP DAS USA I-87211W User Manual page 53

2.11 $AA5
Description:
This command is used to reads the reset status of a module.
Syntax:
$AA5[CHKSUM](CR)
$ Delimiter character
AA Address of the module in hexadecimal format (00
to FF)
5 Command to read the module reset status
Response:
Valid Command:
Invalid Command:
! Delimiter for a valid command
? Delimiter for an invalid command
AA Address of the module in hexadecimal format (00
to FF)
S The reset status of the module
1: This is the first time the command has been
sent since the module was powered on
0: This is not the first time the command has been
sent since the module was powered on, which
denotes that there has been no module reset
since the last $AA5 command was sent
!AAS[CHKSUM](CR)
?AA[CHKSUM](CR)
53/93 I-87211W User Manual V2.5, Oct. 2010
I-87211W User Manual