Aaacdd - ICP DAS USA I-87211W User Manual

2.8 #AAAcDD

Description:
This command is used to set a single digital output channel for
the lower eight channels.
Syntax:
#AAAcDD[CHKSUM](CR)
# Delimiter character
AA Address of the module in hexadecimal format (00
to FF)
A Command to set a single digital output channel
for the lower eight channels
c Specifies the digital output channel to be set
(ranging from 0 to 7)
DD 00: set the digital output channel to off
01: set the digital output channel to on
Response:
Valid Command:
Invalid Command:
Ignored Command:
> Delimiter for a valid command
? Delimiter for an invalid command
! Delimiter for an ignored command:
If a Host WatchDog Timeout occurs, the module
will reset to safe mode and the DO output
>[CHKSUM](CR)
?AA[CHKSUM](CR)
47/93 I-87211W User Manual V2.5, Oct. 2010
I-87211W User Manual