Aam - ICP DAS USA I-87211W User Manual

2.16 $AAM

Description:
This command is used to read the name of a module.
Syntax:
$AAM[CHKSUM](CR)
$ Delimiter character
AA Address of the module in hexadecimal format (00
to FF)
M Command to read the module name
Response:
Valid Command:
Invalid Command: ?AA[CHKSUM](CR)
! Delimiter for a valid command
? Delimiter for an invalid command.
AA Address of the module in hexadecimal format (00
to FF)
(Data) Name of the module as string
There will be no response if the command syntax is incorrect,
there is a communication error, or there is no module with the
specified address.
Example:
Command: $01M
Response: !01GPS721
Reads the module name of module 01 and returns
the name "GPS721".
!AA(Data)[CHKSUM](CR)
62/93 I-87211W User Manual V2.5, Oct. 2010
I-87211W User Manual