Aad - ICP DAS USA I-87211W User Manual

2.14 $AAD

Description:
The $AAD command is used to update the current date of the
module. Command #AA4 is use to read the current date. It
takes 2 seconds to read the date.
Syntax:
$AAD[CHKSUM](CR)
$ Delimiter character
AA Address of the module in hexadecimal format (00
to FF)
D Command to update the current date
Response:
Valid Command:
Invalid Command: ?AA[CHKSUM](CR)
! Delimiter for a valid command.
? Delimiter for an invalid command.
AA Address of the module in hexadecimal format (00
to FF)
There will be no response if the command syntax is incorrect,
there is a communication error, or there is no module with the
specified address.
!AA[CHKSUM](CR)
59/93 I-87211W User Manual V2.5, Oct. 2010
I-87211W User Manual