ICP DAS USA I-87211W User Manual page 49

2.9 $AA2
Description:
This command is used to read the module configuration.
Syntax:
$AAN[CHKSUM](CR)
$ Delimiter character
AA Address of the module in hexadecimal format (00
to FF)
2 Command to read the module configuration
Response:
Valid Command:
Invalid Command: ?AA[CHKSUM](CR)
! Delimiter for a valid command
? Delimiter for an invalid command
AA Address of the module in hexadecimal format (00
to FF)
TT Type code for the module
40 indicates a DO Module
CC The BaudRate code for the module. See Section
1.9 for details
FF Setting for the checksum and the direction of the
counter update for the module. See Section 1.9
for details
!AATTCCFF[CHKSUM](CR)
49/93 I-87211W User Manual V2.5, Oct. 2010
I-87211W User Manual