Aao(Name) - ICP DAS USA I-87211W User Manual

2.20 ~AAO(Name)

Description:
The command is used to set the name of the module.
Syntax:
~AAO(Name)[CHKSUM](CR)
~ Delimiter character
AA Address of the module in hexadecimal format (00
to FF)
O Command to set the module name
(Name) The new name of the module (max. 6 characters)
Response:
Valid Command:
Invalid Command:
! Delimiter for a valid command
? Delimiter for an invalid command
AA Address of the module in hexadecimal format (00
to FF)
There will be no response if the command syntax is incorrect,
there is a communication error, or there is no module with the
specified address.
!AA[CHKSUM](CR)
?AA[CHKSUM](CR)
69/93 I-87211W User Manual V2.5, Oct. 2010
I-87211W User Manual