User Interface Logging; Demo Scan - Snap-On PRO-LINK EDGE Hardware User Manual

User Interface Logging

The User Interface Logging utility is used by Snap‐on Technical Support to create
a log file to assist in resolving issues encountered during an active vehicle session.
The log is not visible to the user. However, it provides information useful to the
Technical Support team when solving issues.
NOTE:
i
Do not enable this utility unless directed to do so by a Technical Support
specialist.

Demo Scan

Demo Scan enables testing the features and functionality of the PRO-LINK
in Demo Mode.
Touch the Scan button to initiate.
Select End Session from the drop-down menu in the upper-left corner of the
screen to terminate Demo Mode and to return to the Troubleshoot Menu
(Figure 8.11).
- Introduction to the Support Menu
®
PRO-LINK Edge Hardware and Software User's Manual 175
®
Edge