Scanning A Vehicle - Snap-On PRO-LINK EDGE Hardware User Manual

Scanning a Vehicle

The following scanning options are available:
• HD Scan (Auto)—Scans the vehicle, presents a list of ECMs detected
during scanning, and enables you to select up to six (6) modules from
the list.
• LMT—Begins the Light and Medium Truck scanning process.
NOTE:
i
A Manual Scan option is also available. See "Manual Scan" in Chapter 8:
Using the Support Menu, later in this manual.
To scan a vehicle:
1
Verify that the connections are tight and solid before scanning begins.
2
From the Main Menu (Figure 3.1), select HD Scan.
Figure 3.2
• HD Scan (pg. 34)
• LMT (pg. 38)
Vehicle Scan Menu
PRO-LINK
®
Edge Hardware and Software User's Manual
- Scanning a Vehicle
33