Select A Calibration Category - Snap-On PRO-LINK EDGE Hardware User Manual

Select a Calibration Category

A calibration category is a collection of related calibrations. The first time you
select the Calibrations tab during a session, the PRO-LINK
select a module, and then displays the available calibration categories for that
module.
To select a calibration category and view the associated datapoints:
1
From the Diagnostics Menu (Figure 4.1), select the Calibrations.
If you have not yet used the Calibrations during your current session, the
Select a Module screen is displayed.
Figure 4.20
2
Touch the screen to select the module you want (e.g., Engine - MaxxForce
- Ch1).
NOTE:
i
Depending on the vehicle to which you are connected, there may be more
than one module in the list on the left.
Select a Module Screen
PRO-LINK
®
Edge prompts you to
®
Edge Hardware and Software User's Manual
- The Diagnostics Menu
77