Requesting A Callback; Call Waiting - Inter-Tel AXXESS User Manual

Inter-Tel AXXESS

REQUESTING A CALLBACK

When you call a phone that is busy or try to select an outgoing line that is busy, you
can stay on the line and wait for it to become available (this is called "camping on") or
you can request a callback ("queue" on the phone or line). If you request a callback,
your phone will ring when the phone or line you are waiting for is available.
To camp on to a busy phone or line:
— When you hear busy signals, do not hang up. You hear music, if available, until
the line or phone is available.
To request a callback (queue on to the phone or line):
— When you hear busy signals, press
do this even if your call has "camped on" and you hear music.)
— When your keyset rings, lift the handset and wait for the other party to answer.
To cancel a queue before the callback:
— While on hook, dial

CALL WAITING

If you receive a call while you are already on another call, you will hear a "call wait-
ing" tone through your handset and/or you see a display.
To respond to a waiting call (you hear a single tone and a key is flashing):
— If you wish to end the current call, hang up. The waiting call rings in. Answer as
usual.
— If you wish to place the current call on hold, press
ing call by pressing the flashing key.
— If you wish to have the caller hear do-not-disturb signals, press
25 for more information about do-not-disturb mode.)
Standard & Basic Keyset User Guide
SPCL
.
6
13
and dial . Then hang up. (You can
6
. Then answer the wait-
HOLD
. (See page
DND