Do-Not-Disturb - Inter-Tel AXXESS User Manual

Inter-Tel AXXESS

DO-NOT-DISTURB

Placing your keyset in do-not-disturb halts all pages and calls to your keyset (except
for queue callbacks, recalls, and direct ring-in calls). Other users calling your keyset
hear a repeating signal of four fast tones. Display keyset users also see the do-not-dis-
turb message you have selected.
There can be up to 20 different Do-Not-Disturb messages in your telephone system.
They can be changed by the system administrator, installer, or programmer. Your
customer service representative, trainer, or system administrator will give you a list
of Do-Not-Disturb Messages for your system. You can list them here for your conve-
nience:
01 _______________________
02 _______________________
03 _______________________
04 _______________________
05 _______________________
06 _______________________
07 _______________________
08 _______________________
09 _______________________
10 _______________________
To enable do-not-disturb:
— Press
DND
— Dial the desired 2-digit number for the message you wish to use or press
to scroll forward or
— If desired, customize the second display line by entering the desired numbers or
letters as described below:
• Remain in numeric mode (MSG key unlit): Press the keypad keys to dial the
desired numbers. Press
FWD
Continued...
.
to scroll backward through the messages.
VOL
#
to leave a space, or press
Standard & Basic Keyset User Guide
11 _______________________
12 _______________________
13 _______________________
14 _______________________
15 _______________________
16 _______________________
17 _______________________
18 _______________________
19 _______________________
20 _______________________
for a hyphen (–), press
to backspace.
MUTE
25
VOL
for a colon (:), press
*