Tare Setting (Setting Mode 1-8); 5-15.Tare Weight Display (Setting Mode 1-9); 5-16.Key Invalid (Setting Mode 3-5) - Unipulse F701-P Operation Manual

■Tare setting (setting mode 1-8)

A value exceeding the capacity or a scale interval falling below the min scale division cannot be
input.
(Input range/0 - 99999)
Point
5-15.
Tare weight display (setting mode 1-9)
This function displays the current tare weight. The tare weight displayed here is a result with one-
touch tare subtraction and digital tare subtraction (preset tare weight) taken into consideration.
Point
5-16.
Key invalid (setting mode 3-5)
Function keys on the front panel can be disabled to prevent misoperation by key operation.
- [TARE] key
- [TARE RESET] key
- [ZERO] key
- [GROSS/NET] key
37
One-touch tare subtraction and digital tare subtraction (preset tare weight) work
independently. Even when the preset tare weight setting is ON, one-touch tare
subtraction is immediately performed to zero the net weight value by pressing the
key.
- If the tare weight is 0, "
- If the tare weight is other than 0, "
- If (tare weight by one-touch tare subtraction) - (tare weight by digital tare
subtraction) = 0, "
(Select from 0: Invalid/1: Valid)
(Select from 0: Invalid/1: Valid)
(Select from 0: Invalid/1: Valid)
(Select from 0: Invalid/1: Valid)
Key invalid
[TARE] key
0: Invalid
1: Valid
[TARE RESET] key
0: Invalid
1: Valid
" goes out.
" lights.
" goes out.
5 FUNCTION SETTINGS
[GROSS/NET] key
0: Invalid
1: Valid
[ZERO] key
0: Invalid
1: Valid
Chapter
5
37