Table of Contents
Advertisement
3 SETTING METHOD
Setting mode No.
Chapter
3
■How to register a setting value
In the text, how to register a setting value is described as follows:
Example 1) For setting a balance weight value of 50.00kg (setting by numerical input)
This operation can be performed by the following procedure.
* However, it is assumed that setting mode 4 is selected.
14
14
4.
Press the
key.
Current weight value
Point
Pressing the
key when a setting mode No. is displayed restores the usual
display (setting mode 0).
→
→
1.
Select a setting item.
(Press the
key because the balance weight value setting item No. is 1.)
Current setting value
Setting item No.
Setting mode No.
2.
Press the
key.
Current setting value
Setting item No.
Setting mode No.
3.
Input a setting value. (
Current setting value
Setting item No.
Setting mode No.
The selected setting mode No. and weight value
kg
are displayed (Setting mode No. display).
The setting mode No., setting item No.,
kg
and current setting value are displayed.
The highest-order digit of the setting value blinks.
kg
The blinking number moves to a lower-order
digit each time a number is pressed.
kg
When a number is input to the lowest-order
digit, the highest-order digit starts blinking
again, so that you can redo the setting as many
times as you want.
→
)
Advertisement
Table of Contents
