Appearance Description; Front Panel - Unipulse F701-P Operation Manual

1 OUTLINE
1-3.

Appearance description

Chapter
1

■Front panel

①Main display
②Subdisplay
⑤Setting key
①Main display
The following three types of displays will appear.
(1) Weight value display
(2) Over scale/error display
(3) Setting value display
②Subdisplay
Weighing data, such as accumulation value, and various setting values are displayed by setting.
* See "5-2.Subdisplay selection (setting mode 4-5)" on page 31.
(1) Accumulation count and accumulation value
(2) Accumulation value
(3) Accumulation count
2
2
Gross weight or net weight is displayed.
In the case of a calibration error, the error and weight value are displayed alternately.
Over scale and other errors are displayed.
* See "11-2.Over scale/error display" on page 100.
Various setting values are displayed.
Accumulation count Accumulation value
Accumulation value
Accumulation count
③Unit display
④Status display
⑥Function keys