Removing A Hard Disk Drive - HP Visualize J5000 Owner's Manual

CAUTION
Figure 3-2
Hot-Pluggable Hard Disk Drives
The Disk Drives

Removing a Hard Disk Drive

The instructions for removing a disk drive from the J5 Class and J7
Class are printed on the front panel, and are visible when the panel door
is opened, as shown in the detail below.
If you are removing a hard disk drive while the system is running, you
must perform the operations outlined in "The Hot-Plug Procedure" on
page 81 before the physical removal of the drive, or data corruption is
likely to occur.
Removing a Hard Disk Drive
The instructions are also printed here for your convenience:
1. Identify the drive to be removed, and make sure it is not currently in
use. If the machine is to remain powered up, see the section "The
Hot-Plug Procedure" on page 81 for the proper preparations.
2. Push the plastic retaining tab to the right, to release the drive-tray's
handle. Pull the handle on the drive to unseat it from its power and
data connections.
74 Chapter 3