Audio Control For The Cd Drive; Installing The Xmcd Utility - HP Visualize J5000 Owner's Manual

Audio Control for the CD Drive

The audio controls for your CD drive are provided through the xmcd
utility. This is a third-party CD player utility that runs on an X windows
system using the Motif graphical user interface. The xmcd utility is not
supported by Hewlett-Packard, and it is one of many audio controllers for
CD drives available in the marketplace. Since the xmcd utility is not a
part of HP-UX, you will need to download it off the web using your web
browser and this URL:
http://metalab.unc.edu/tkan/xmcd

Installing the xmcd Utility

Here is the procedure for downloading the xmcd utility to your system:
1. Log in as root.
2. Type the previously given URL into the entry box on your web
browser and press
3. Select the menu item labeled Downloads found on the xmcd
homepage.
4. Scroll down to the section "Select your platform:" on the Downloads
web page and select the item labeled "HP-UX 9.x and later (HP
PA-RISC)."
5. Wait for a few seconds for the
this window, click in the Selection entry box and type the following
path and file name:
/tmp/xmcdbin.tar.gz
Next, click the
OK
your system.
6. Follow the instructions in the section "Instructions to unpack xmcd
binary" found on this Binary Downloads web page. This will
complete the installation of the xmcd utility.
Chapter 4
Audio Control for the CD Drive
.
Enter
Save As...
button. This completes the download of xmcd to
Using Your CD Drive
pop-up window to appear. In
93