Scsi Restrictions; Cables - HP Visualize J5000 Owner's Manual
Visualize j class workstation
Hide thumbs
Also See for Visualize J5000:
- Supplementary manual (214 pages) ,
- Owner's manual (212 pages) ,
- Handbook (178 pages)
Table of Contents
Advertisement
Table 7-2
SCSI Connections
SCSI Restrictions
SCSI Restrictions
This section describes the SCSI restrictions that apply to your
workstation in the following areas:
• Cables
• Terminators
• Number of Devices Per SCSI Bus
• Considerations for Selecting SCSI Devices
Note that the narrow single-ended SCSI bus supports only 7 devices
because address 7 is reserved by the system. The Ultra2 Wide
Low-Voltage Differential SCSI bus supports only 15 devices because
address 7 is reserved by the system.
Cables
Only SCSI cables approved by HP can be used to connect your
workstation to any SCSI devices. HP offers the following SCSI cables for
Ultra Narrow Single-Ended SCSI devices:
Ultra Narrow Single-Ended SCSI Cables
Cable
Number
Length
C2955A
C2908A
C2956A
C2957A
124
Cable
0.5m
50-pin HDTS (High-Density Thumbscrew)
to 50-pin HDTS
1.0m
1.5m
2.0m
Description
Chapter 7
Advertisement
Table of Contents
Need help?
Do you have a question about the Visualize J5000 and is the answer not in the manual?
Questions and answers