HP Visualize J5000 Owner's Manual page 64

Changing Your Computer's Hardware Configuration
DDS Drive Installation
Figure 2-19 Removing the DDS/Floppy Drive Bracket
4. Install the DDS drive into the bracket: the drive itself must be
Figure 2-20 The DDS Drive Installed Into the DDS/Floppy Drive Bracket
5. Connect the power and ribbon cables to the DDS drive.
6. Slide the bracket, now containing the DDS drive, into the DDS drive
64
inserted into the DDS drive bracket, and secured by four Torx T-10
screws (two on each side).
bay.
Chapter 2