HP Visualize J5000 Owner's Manual page 138

------- Information Menu ------------------------------------------------------
Command
-------
ALL
BootINfo
CAche
ChipRevisions
CoProcessor
FwrVersion
IO
LanAddress
MEmory
PRocessor
WArnings
BOot [PRI|ALT|<path>]
DIsplay
HElp [<menu>|<command>]
RESET
MAin
-------
------- Service Menu ----------------------------------------------------------
Command
-------
ChassisCodes [<proc>|ON|OFF]
CLEARPIM
EepromRead [<addr>] [<len>]
MemRead <addr> [<len>] [<type>] Read memory locations
PciDelay [<value>]
PDT [CLEAR]
PIM [<proc> [HPMC|LPMC|TOC]]
ScRoll [ON|OFF]
BOot [PRI|ALT|<path>]
DIsplay
HElp [<menu>|<command>]
RESET
MAin
-------
The Boot Console Interface
Boot Console Interface Features
138
Description
-----------
Display all system information
Display boot-related information
Display cache information
Display revisions of VLSI and firmware
Display coprocessor information
Display firmware version
Display I/O interface information
Display built-in system LAN address
Display memory information
Display processor information
Display selftest warning messages
Boot from specified path
Redisplay the current menu
Display help for menu or command
Restart the system
Return to Main menu
Description
-----------
Display/enable/disable chassis codes
Clear (zero) the contents of PIM
Read EEPROM locations
Display or set PCI delay value
Display or clear
the Page Deallocation Table
Display PIM information
Display or change scrolling ability
Boot from specified path
Redisplay the current menu
Display help for menu or command
Restart the system
Return to Main menu
Chapter 8