HP Visualize J5000 Owner's Manual page 51

2. Install DIMMs in the order indicated in Figure 2-5 on page 47, or on
Figure 2-9 Inserting a DIMM
White
DIMM-removal
tab
3. To remove a DIMM, push these tabs away from each other, and the
Figure 2-10 Removing a DIMM
White
Chapter 2
the label on the floor of the chassis (the J7xxx requires DIMMs to be
installed in pairs of the same size). Make sure the DIMM-removal
tabs are angled out—away from each other. The DIMMs are keyed;
that is, there are notches in the edge (see Figure 2-10, below) that
prevent the DIMM from being inserted upside down. Once the DIMM
is oriented correctly (the notches in the DIMM lining up with the
bumps in the slot), press firmly and evenly on each DIMM to ensure
that it seats properly; the DIMM-removal tabs will rotate to become
parallel as the DIMM is inserted:
DIMM will be removed from its socket.
Changing Your Computer's Hardware Configuration
Installing Memory
Black
DIMM-removal
tab
Black
51