Ultra2 Wide Low-Voltage Differential Scsi Bus Length - HP Visualize J5000 Owner's Manual
Visualize j class workstation
Hide thumbs
Also See for Visualize J5000:
- Supplementary manual (214 pages) ,
- Owner's manual (212 pages) ,
- Handbook (178 pages)
Table of Contents
Advertisement
NOTE
WARNING
Ultra2 Wide Low-Voltage Differential SCSI Bus
Length
The maximum cable length for an Ultra2 Wide Low-Voltage Differential
SCSI bus is 12 meters. The HP V
uses 1 meter of this maximum cable length internally. This means that
up to 11 meters of cable can be used for connecting external Ultra2 Wide
Low-Voltage Differential SCSI devices to this workstation.
When calculating the total Ultra2 Wide Low-Voltage Differential SCSI
cable/bus/trace length used externally, remember to account for cables
connecting external devices together as well as the bus length internal to
those devices.
Do not attach FWD SCSI devices to the LVD SCSI port, or
damage will occur.
Chapter 7
SCSI Bus Length Constraints
J5 Class and J7 Class system
ISUALIZE
SCSI Connections
129
Advertisement
Table of Contents
Need help?
Do you have a question about the Visualize J5000 and is the answer not in the manual?
Questions and answers