Running System Verification Tests - HP Visualize J5000 Owner's Manual

Running System Verification Tests
HP-UX uses a diagnostics product called the Support Tools Manager that
allows system operation verification. If this software is not already on
your system, it is available on the System Recovery CD (part of the
HP-UX 10.20 media kit).
If the Support Tools Manager is installed, you can access it in a terminal
window. If you are using HP CDE as your interface, you can also access
the Support Tools Manager through the sys_admin directory.
Three interfaces are available with the Support Tools Manager: a
command line interface (accessed through the cstm command), a
menu-driven interface (accessed through the mstm command), and the
graphical user interface (accessed through the xstm command).
For more information on these user interfaces, see the online man pages
by entering one of the following at the command line prompt and
pressing
To access the Support Tools Manager, perform the following steps:
1. Select Terminal from the Personal Applications pop-up menu, which
Figure 9-1 HP CDE Terminal Control in the Personal Application Menu
Chapter 9
:
Enter
man cstm
man mstm
man xstm
is located on the front panel of your HP CDE workspace.
Running System Verification Tests
Troubleshooting
175