Using The Xmcd Utility - HP Visualize J5000 Owner's Manual

Using Your CD Drive
Audio Control for the CD Drive

Using the xmcd Utility

The instructions in the section assume that you are using the HP-UX
10.20 or 11.0 operating system with the HP CDE interface. The xmcd
utility must also be installed on your system. See the section "Installing
the xmcd Utility" above.
To load and play an audio CD, follow the steps in this procedure.
1. Load the audio CD. See the section "Loading a CD" in this chapter.
2. Insert the headphone plug into the headphone jack located on the
back of your system unit.
3. Double-click on the Audio icon located on your HP CDE control
panel.
Audio Icon
94
Microphone
Headphone
Line Out
Line In
Chapter 4