Adding And Connecting The Ip Cameras; Activating The Ip Camera - HIKVISION DS-7100NI-K1 Series User Manual

Adding and Connecting the IP Cameras

Activate the IP Camera
Purpose:
Before adding the camera, make sure the IP camera to be added is in active status.
Select Add IP Camera from the right-click menu in live view mode or Go to Menu >
Camera > IP Camera to enter the IP camera management interface.
For the IP camera detected online in the same network segment, the Password
status shows whether it is active or inactive.
Click the inactive icon of the camera to enter the following interface to activate it.
You can also select multiple cameras from the list and click One-touch Activate to
activate the cameras in batch.
Set the password of the camera to activate it.
Use IP Camera Activation Password: when you check the checkbox, the camera
(s) will be configured with the same password which you set the device
activation interface. Refer to Chapter 2.1.2 Activate Your Device.
Network Video Recorder User Manual
IP Camera Management Interface
27