Chapter 2 Activation; Activate Via Ivms-4200 Client Software - HIKVISION DS-KH6320-TE1 Configuration Manual

2.1 Activate via iVMS-4200 Client Software

You can only configure and operate the indoor station after creating a password for the device
activation.
Before You Start
Default parameters of indoor station are as follows:
Default IP Address: 192.0.0.64.
●
Default Port No.: 8000.
●
Default User Name: admin.
●
Steps
1. Run the client software, enter Device Management, check the Online Device area.
2. Select an inactivated device and click the Activate.
3. Create a password, and confirm the password.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your product.
And we recommend you change your password regularly, especially in the high security system,
changing the password monthly or weekly can better protect your product.
4. Click OK to activate the device.
Network Indoor Station Configuration Guide

Chapter 2 Activation

2