Line Crossing Detection - HIKVISION LTN07128/256 User Manual

Blocklist and Allowlist
You can export the file first to see its format, and edit it and import it to the device.
7. Click Apply.
Note
Refer to Network Camera User Manual for detailed instructions for the vehicle detection.
8. Set the arming schedule. Refer to Configure Arming Schedule.
9. Set the linkage actions. Refer to Configure Linkage Actions.

6.2.4 Line Crossing Detection

Line crossing detection detects people, vehicles, and objects crossing a set virtual line. The
detection direction can be set as bidirectional, from left to right or from right to left.
Steps
1. Go to Smart Analysis → Smart Event Settings → Perimeter Protection.
2. Select a camera.
3. Click Line Crossing.
4. Check Enable Line Crossing Detection.
5. Optional: Check Save VCA Picture to save the captured pictures of line crossing detection.
6. Set the line crossing detection rules and detection areas.
1) Select an arming area.
2) Select Direction as A<->B, A->B, or A<-B.
A<->B
Only the arrow on the B side shows. When an object goes across the configured line with
both directions can be detected and alarms are triggered.
Network Video Recorder User Manual
Figure 6-6 Line Crossing Detection
55