Table of Contents
Advertisement
Speed Adjusted Volume (if equipped) —
Select Speed Adjusted Volume and push the
ENTER/BROWSE button. Turn the TUNE/
SCROLL knob to adjust the setting to Off, 1,
2, or 3. Push the BACK button on the face-
plate when done.
Loudness (if equipped) — Select Loudness
and push the ENTER/BROWSE button to
mark the check box on or off. Push the BACK
button on the faceplate when done.
AUX Volume Offset (if equipped) — Select AUX
Volume Offset and push the ENTER/BROWSE
button. Turn the TUNE/SCROLL knob to
adjust the setting + or – 3. Push the BACK
button on the faceplate when done.
Clock Setting
1. Push the MENU button at the bottom of the
radio, and push the ENTER/BROWSE
button for System Settings. Next, select the
Time and Format setting and then select
Set Time by pushing the ENTER/BROWSE
button.
2. Adjust the hours or minutes by turning the
TUNE/SCROLL knob, then pushing the
ENTER/BROWSE button to move to the next
entry. You can also select 12 hr or 24 hr
format by turning the TUNE/SCROLL knob,
then pushing the ENTER/BROWSE button
on the desired selection.
3. Once the time is set, press the BACK button
to exit the time screen.
Media Mode
Operating Media Mode
Media Mode is entered by pushing the MEDIA
button on the faceplate located to the left of the
display. Once in Media Mode, press the MEDIA
button in order to select the desired media
source.
Audio Source Selection
Push the MEDIA button on the faceplate to
select the desired audio source, disc (if
equipped), AUX, USB or Bluetooth® audio
device.
MULTIMEDIA
Seek Up/Seek Down
Push and release the SEEK UP
faceplate for the next selection.
Push and release the SEEK DOWN
the faceplate to return to the beginning of the
current selection, or return to the beginning of
the previous selection if the Media is within the
first three seconds of the current selection.
Fast SEEK UP
Push and hold the SEEK UP
button on the
faceplate and the desired mode will begin to
fast forward through the current track until the
button on the faceplate is released.
Fast SEEK DOWN
Push and hold the SEEK DOWN
the faceplate and the desired mode will begin to
rewind through the current track until the
button on the faceplate is released.
Track Info
Push the INFO button on the faceplate to
display the current track information.
363
button on the
button on
button on
9
Advertisement
Table of Contents
