A/V Configuration And Fm Radio; Presets - CYBEX 625C Owner's Manual

Languages Set E3 View Monitor language. Standard languages available. English (Default).
Reset setup options to default values
Reset LED console
1.
Press the Display Option
The console will display RESET and [dEFA][ULtS] [? ].
To exit without resetting, press the ENTER
2.
Press the Display Option
The console will beep twice and return to setup mode.
Reset E3 View Monitor
1.
Press the Display Option
The console will display RESET and Reset Defaults? NO.
To exit without resetting, press the ENTER
2.
Press the UP
3.
Press the ENTER
The console will beep twice and return to setup mode.
Exit Set Up mode
Press the STOP key to exit Setup options.
A/V Configuration and FM Radio Presets
Perform this procedure if the unit includes the optional Wireless Audio Receiver Module.
Tools Required:
Headphones (not included)
Setting up the Cybex Wireless Audio Receiver Module requires four steps:
1. Determine the type of transmitter used (MYE 900MHz, Broadcast Vision 863MHz, etc. or TV FM).
2. Set A/V Device to Wireless TV.
3. Assign a TV channel number to each transmitter on the console.
4. Add FM radio station presets (optional).
Cybex 625C/625R Cycle Part Number LT-23688-4 F
key at the first setup option screen (Time).
key to reset the console to the default values.
key at the first setup option screen (Time).
or DOWN keys to select YES.
key to reset the console to the default values.
key.
key.
Page 29 of 80