CYBEX 625C Owner's Manual page 25

8. Connect the console cable's DIN connector to the power supply output.
Make sure the two connectors snap firmly together and can not be pulled apart without pulling the
sleeve back to release it.
Install front covers
1. Install front right cover with three screws using a Phillips screwdriver.
In addition to three mounting screws per front cover, there are five plastic connectors that secure
the front covers together. Ensure that all four plastic connectors are inserted properly in each front
cover.
Cybex 625C/625R Cycle Part Number LT-23688-4 F
Page 25 of 80
Description
1 Power Supply Output
2 Console Cable DIN Connector
3 Power Cord
Description
1 Screw, 8-16 × .50"
2 Screw, 8-16 × .75"
3 Front Right Cover
Qty.
1
1
1
Qty.
3
1
1