CYBEX 625C Owner's Manual page 33

4.
Press Display option
manually.
5.
Press Resistance UP
Press ENTER
6. Repeat steps 3 and 4 to add all TV FM channels.
7. Press Stop to exit setup when all the TV's FM transmitter frequencies have a TV number.
Transmitter setup complete.
8. Proceed to Add FM Radio Stations (optional).
Add FM Radio Stations (optional)
If strong local FM Radio Stations are available in the area, you can set those as presets.
1. Enter A/V setup mode.
2. Press Workouts to display FM on the console.
The left numeric will display CH 1.
3.
Press Display option
manually.
4.
Press Resistance UP
Press ENTER
5. Repeat steps 3 and 4 to save up to 32 FM radio stations.
6. Press Stop to exit setup when all FM radio stations are stored.
7.
Press UP or DOWN
Adjust sound volumes
After completing setup, the sound volume should be adjusted between the TV transmitters and the FM
radio stations. If FM radio stations are not set, adjust volume between all TV's.
1.
Press Up or Down
This volume is not adjustable and is the base volume.
2.
Press Up or Down
3. Adjust the volume of each TV to match an FM Radio Station or each other using the TV's remote
control.
The goal is for a volume setting of 10 on the treadmill to be the same for all TV and FM channels.
4. Repeat procedure for all TV's.
Cybex 625C/625R Cycle Part Number LT-23688-4 F
to seek the next TV FM frequency or UP
or DOWN
to save channel, std (stored) will be displayed.
to seek the next TV FM frequency or UP
or DOWN
to save channel, std (stored) will be displayed.
keys to scroll through and verify all FM radio stations.
to select an FM radio station.
to select a TV station.
keys to add [Add] a channel.
keys to add [Add] a channel.
Page 33 of 80
or DOWN to tune
or DOWN to tune